IL388DAA document number 83723 rev. 1.4, 11-aug-06 vishay semiconductors www.vishay.com 1 i1790 8 5 1 2 3 4 5 6 7 8 c2 b2 n .c n .c k a b1 c1 k1 k2 linear optocoupler, pcmcia package features ? 2.3 mm high smd package ? high sensitivity (k1) at low operating led current ? couples ac and dc signals ? low input-output capacitance ? isolation test voltage, 2130 v dc ? low distortion, below - 80 db (typical) ? 0.4 mm internal in sulation thickness ? lead-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec agency approvals ? csa 93751 applications ? optical daa for v.90 fax/modem ? pcmcia cards ? digital telephone line isolation description the IL388DAA linear optocoupler consist of an irled optically coupled to two photodiodes. the emitter is located such that both photodiodes receive approximately an equal amount of infrared light. the diodes produce a proportional amount of photocur- rent. the ratio of the photocurrent stays constant with high accuracy when either the led current or the ambient temperature changes. thus one can control the output diode current opt ically by controlling the input photodiode current. the IL388DAA is designed to be part of the daa2000 kit which consists of one dl207daa, one dm207daa, and two IL388DAAs. the dl207daa and dm207daa ics provide the driv- ers and receivers for the IL388DAA as well as all other telephone termination functions. order information for additional information on t he available options refer to option information. absolute maximum ratings t amb = 25 c, unless otherwise specified stresses in excess of the absolute maximum ratings can cause pe rmanent damage to the device. func tional operation of the device is not implied at these or any other condition s in excess of those given in the operatio nal sections of this document. exposure to absolute maximum rating for extended periods of t he time can adversely affect reliability. input part remarks IL388DAA couples ac and dc signals, sop-8 parameter test condition symbol value unit reverse voltage v r 3.0 v forward current i f 30 ma surge current pulse width < 10 s i pk 150 ma power dissipation p diss 150 mw derate linearly from 25 c 2.0 mw/c junction temperature t j 100 c rohs compliant e3
www.vishay.com 2 document number 83723 rev. 1.4, 11-aug-06 IL388DAA vishay semiconductors output coupler electrical characteristics t amb = 25 c, unless otherwise specified minimum and maximum values are testing require ments. typical values are c haracteristics of the device and are the result of eng ineering evaluation. typical values are for information only and are not part of the testing requirements. input output parameter test condition symbol value unit reverse voltage v r 15 v power dissipation p diss 50 mw derate linearly from 25 c 0.65 mw/c junction temperature t j 100 c parameter test condition symbol value unit isolation test voltage v iso 2130 v dc total package power dissipation p t 250 mw derate linearly from 25 c 2.8 mw/c storage temperature t stg - 40 to + 150 c operating temperature t amb 0 to + 75 c lead soldering time at 260 c 10 s isolation resistance v io = 500, t amb = 25 c r io 10 12 v io = 500, t amb = 100 c r io 10 11 parameter test condition symbol min ty p. max unit forward voltage i f = 10 ma v f 1.8 2.1 v reverse current v r = 3.0 v i r 0.01 10 a v f temperature coefficient v f / c tbd mv/c junction capacitance v f = 0 v, f = 1.0 mhz c j 15 pf dynamic resistance v f / i f 6.0 parameter test condition symbol min ty p. max unit junction capacitance v f = 0 v, f = 1.0 mhz c j 12 pf ac characteristics photovoltaic mode frequency response i p1 = 25 a modulation current i p1 = 6.0 a bw (-3 db) 1.0 mhz phase response i p1 = 25 a modulation current i p1 = 6.0 a 45 deg. rise time i p1 = 25 a modulation current i p1 = 6.0 a t r 350 ns
IL388DAA document number 83723 rev. 1.4, 11-aug-06 vishay semiconductors www.vishay.com 3 coupler package dimensions in inches (mm) parameter test condition symbol min ty p. max unit capacitance (input-output) v f = 0 v, f = 1.0 mhz c io 1.0 pf common mode capacitance v f = 0 v, f = 1.0 mhz c cm 0.5 pf coupled characteristics k 1 i f = 2.0 ma, v d = 0 v k1 0.007 thd f 0 = 316, i pi = 35 a, v d = 0 v - 79 db k 3 = k 2 /k 1 i f = 2.0 ma, v d = 0 v 0.70 1.30 i17 8 013 40 3 - 7 10 typ. pin one id iso method a 0.225 (5.7) 0.215 (5.5) 0.336 ( 8 .4) 0.010 ( 0.25) 0.230 (5. 8 ) 0.220 (5.6) 0.091 (2.3) 0.0 8 3 (2.1) 0.043 (1.09) 0.033 (0. 8 3) 0.050 (1.25) typ. 0.016 (0.41) typ. 0.015 (0.3 8 ) 0.002 (0.05) 0.042 (1.05) ref. 0.006 (0.15) typ. 0.050 (1.27) r 0.010 (0.25) 0.266 (6.76) 0.356 (9.04) 0.291 (7.2 8 ) 0.010 (0.250) 0.047 (1.19) 0.002 (0.05) 0.045 (1.14) 0.014 (0.36) 0.036 (0.91)
www.vishay.com 4 document number 83723 rev. 1.4, 11-aug-06 IL388DAA vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semi conductors are not manufactured with ozone depleting substances and do not co ntain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buy er use vishay semiconductors products for any unintended or unauthorized application, the buyer sh all indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
